|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
VISHAY RS07B to RS07J Vishay Semiconductors Small Surface Mount Fast Diodes \ Features * * * * * For surface mounted applications Low profile package Ideal for automated placement Glass passivated High temperature soldering: 260 C/ 10 seconds at terminals 17249 Mechanical Data Case: JEDEC -DO219-AB (SMF) Plastic case Polarity: Band denotes cathode end Weight: approx. 0.01 g Packaging codes-options: G1-10 K per 13" reel (8 mm tape), 50 K/box G2-3 K per 7" reel (8 mm tape), 30 K/box Parts Table Part RS07B RS07D RS07G RS07J Type differentiation Single Diodes Single Diodes Single Diodes Single Diodes RB RD RG RJ Marking SMF SMF SMF SMF Package Absolute Maximum Ratings Tamb = 25 C, unless otherwise specified Parameter Maximum repetitive peak reverse voltage Test condition Part RS07B RS07D RS07G RS07J Maximum RMS voltage RS07B RS07D RS07G RS07J Maximum DC blocking voltage RS07B RS07D RS07G RS07J Maximum average forward rectified current Ttp = 65 C TA = 45 C Symbol VRRM VRRM VRRM VRRM VRMS VRMS VRMS VRMS VDC VDC VDC VDC IF(AV) IF(AV) Value 100 200 400 600 70 140 280 420 100 200 400 600 1.4 0.5 Unit V V V V V V V V V V V V A A Document Number 85742 Rev. 3, 21-Feb-03 www.vishay.com 1 RS07B to RS07J Vishay Semiconductors Maximum Thermal Resistance Tamb = 25 C, unless otherwise specified Parameter Thermal resistance junction to ambient air1) Operating junction and storage temperature range 1) VISHAY Symbol RJA TJ, TSTG Value 180 - 55 to + 150 Unit K/W C Mounted on epoxy glass PCB with 3 x 3 mm, Cu pads ( 40 m thick) Electrical Characteristics Tamb = 25 C, unless otherwise specified Parameter Maximum instantaneous forward voltage Maximum DC reverse current at rated DC blocking voltage Reverse recovery time 0.7 A2) TA = 25C TA = 125C IF = 0.5 A, IR = 1 A, Irr = 0.25 A IF = 0.5 A, IR = 1 A, Irr = 0.25 A IF = 0.5 A, IR = 1 A, Irr = 0.25 A IF = 0.5 A, IR = 1 A, Irr = 0.25 A Typical capacitance 2) Test condition Part Symbol VF IR IR Typ. Max 1.15 10 50 150 150 150 250 Unit V A A ns ns ns ns pF RS07B RS07D RS07G RS07J trr trr trr trr CJ 9 4 V, 1 MHz Pulse test, 300 s pulse width 1 % duty cycle www.vishay.com 2 Document Number 85742 Rev. 3, 21-Feb-03 VISHAY Package Dimensions in mm Cathode Band T op View RS07B to RS07J Vishay Semiconductors 1.8 0.1 1.0 0.2 5 0.98 0.1 2.8 0.1 0.05 - 0.30 5 Detail Z enlarged Z 0.60 0.25 0.00 - 0.10 3.7 0.2 17247 Mounting Pad Layout 1.6 1.2 1.2 17248 Document Number 85742 Rev. 3, 21-Feb-03 www.vishay.com 3 RS07B to RS07J Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. VISHAY 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 www.vishay.com 4 Document Number 85742 Rev. 3, 21-Feb-03 |
Price & Availability of RS07J |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |